Mold Removal

Mold Removal & Remediation in NYC

PrimeAire has  experience and successful completion of  projects in New York and New Jersey evolving into a most cost effective and reliable environmental group. Regardless of the size or complexity of your residential or commercial project, environmental contracting calls for highly specialized skills and knowledge from start to finish. We do it right. Our experience and expertise when it comes to dealing with hazardous substances and materials ensures that your mold problem will be dealt with quickly, safely, and efficiently.

Our mold removal services in a NYC home
Mold contamination, a common occurrence in water-damaged buildings, is a proven serious health risk; immediate removal is key. Maintaining your home and protecting your family from avoidable disease are two good reasons to assess the potential impact of mold on your home. Many families wait until mold contamination is very high before acting to correct this problem. If the home or building has had current or past water damage, particularly to building materials, a microbial investigation is warranted.



* All of our procedures follow IAQA-IAQC and EPA guidelines

PrimeAire Services Include:

•      Mold Removal & Remediation Services /// IAQA - Certified Mold and Microbial Remediation
•      Mold Cleaning, Neutralization, Encapsulation and Prevention
•      Enzyme and Bio treatments
•      BroadSource, limited and local containment
•      Filtration and Fumigation HVAC and Vent/Duct Work Decontamination
•      Structural Dehumidification & Water Extraction
•      Furniture & Contents Decontamination
•      Property Evaluations and Mold Assessments
•      Expert Witness Testimony and Documentation
•      Environmentalist NETWORK (Errors & Omissions Insured)
•      Catastrophe Services
•      Fumigation
•      Odor Neutralization
•      Electric fogging
•      Sanitizing Carpeting and Upholstery
•      Disinfecting
•      Allergy Cleansing
•      Consultation and Advice
•      Machine Rentals
•      HEPA Vacuum Process
•      Dry-Ice Procedures
•      Restoration
•      Monitor and test post remediation of moisture and humidity
•      Post thermal image retraction   

Phases of AACO Standard Mold Remediation:

1)  Project Development

It is vital to calculate the extent of the damage caused by mold. Developing a sensible project plan for clean up and mold remediation in the first phase can greatly decrease microbial growth

2)  Preparation

Removal of all items including furniture from the infected area prior to setting up containment is necessary. If items are moved from one room to another they must be HEPA vacuumed and cleansed with mold inhibiting chemicals. Extreme situations may require that all items/furniture in the infected area be cleaned under negative air pressure before anything can be moved.

3)  Containment

Sealing off the work area by covering floor and door openings with polyethylene sheeting prevents contaminants (toxic mold) from spreading to the rest of the building.

4)  Structural Removal & Cleanup

Removing and sanding growth areas on building materials such as drywall, plywood, insulation and framing. Removal of damaged materials is executed under negative air pressure through HEPA filtration followed by bagging and disposal of waste. During this process, PrimeAire will use disposable coveralls and respirators with HEPA filters for protection against toxic mold.

5)  Anti-Microbial Application

Applying mold inhibiting chemicals to exposed surfaces prevents the re-growth of toxic mold. Remediation verification can be requested at this point to confirm the accomplishment of the mold removal project.

6)  Restoration

Providing reconstruction services. If moisture is present, dehumidification systems are used until all exposed areas are dry. New materials can then be installed, restoring the area to its original, purified state.

PrimeAire Certified Mold Remediation and Prevention:

•        IAQA-IAQC Certified mold remediation, microbial remediation and sanitizing
•        Mildew cleaning, retardation, encapsulation and prevention
•        Mold cleaning, removal, neutralization, encapsulation and prevention

For detailed information or to request a quote,

Call PrimeAire Mold Services at 1-877-307-5166 to speak to a Live Certified Mold Professional today.